top of page

e3 Design Series

2017_e3_design.jpg

All the benefits of the e3Classic in a sleek, super compact design. Just 185mm deep.

The e3 Design Series™ delivers the energy savings of the latest Heat Pump technology, along with a super compact, elegant design and many state-of-the-art features.

Slim and Elegant Design
The slim and elegant design is realised by the heat exchanger and high efficiency wind blower.

Human Sensor, for more energy savings
When movement is not detected the energy save mode activates, and the capacity is reduced until the sensor detects human movement again.

Powerful Operation
20 minutes continuous operation by maximum airflow and maximum compressor speed is possible. Rapid cooling and heating makes the room comfortable quickly.

Energy Efficient
The economy mode will limit energy consumption (up to 30% of normal mode). Maintaining a slightly higher temperature in Cool Mode and lower temperature in Heat Mode, as well as limiting maximum current.

10°C Heat Operation
This function ensures the room temperature does not drop below 10°C. NB. If the room temperature is above 10°C the function does not need to start

Healthy Air Filters

Fujitsu’s advance air filter systems can help contribute to a fresher, cleaner living environment and their catechin filters are approved by the Asthma and Respiratory Foundation NZ’s Sensitive Choice ® Programme’

Better Control
This smart, very thin and easy-to-use remote has a large LCD display and a one-touch button.
There are many new, unique features:

Program Timers
The e3 Series gives you 7-day ‘set-and-forget’ control, if you wish. 
ON/OFF timer can be set four times per day, so you can set any program to suit your lifestyle.

programtimers_e3.png

Sleep Timer
The set temperature is gradually stepped down to match your body’s requirements as you fall asleep, and then is automatically and gradually stepped back up before waking.

Super Quiet
ALL Fujitsu Hi-Wall models are equipped with 4 fan speeds including quiet fan mode, allowing some of the indoor units to operate as low as 21 or 22 decibels (that’s quieter than a human whisper). In addition to this, Fujitsu’s fan technology means that our models operate quietly even when working their hardest to quickly heat or cool a room. The e3Series also incorporates quiet mode on the outdoor unit.

e3d_elegantdesign2.png
e3d_humansensor.png
e3d_powerfuloperation.png
economyoperation (1).png
e3d_10degree.png
asthmalogos.jpg

Fujitsu’s Catechin Filters

are approved by the Asthma and Respiratory Foundation

NZ’s Sensitive Choice ® Programme

controller_e3.png

Powerful operation
20 minutes continuous ‘extra power’ boost, to give you rapid heating or cooling whenever you want it.

Low noise mode for outdoor unit
The low noise button on the remote controller makes it easy to switch the outside unit to low noise.

10°C HEAT operation
The room temperature can be set to go no lower than 10C, thus ensuring that the room never gets too cold when not occupied

Economy Operation
This energy saving operation lowers power consumption by cutting the maximum current. It is selected with just one touch on your controller.

sleeptimer_e3.png
SuperQuiet.png
e3specs_design.jpg
FitaFujitsu_logo.gif
bottom of page